Helmets, Masks & Screens
Helmets, Masks & Screens
The new stylish high—tech helmet design from ESAB. The new shell is available in striking high gloss colour, ‘Ye||ow’. The helmet features the ESABcomfort headgear, whilst the light weight shell offers superior face, head, ear & neck protection, which allows for welding in all positions. The ESAB variable shade ADF uses the latest technology and has proven reliability. The ADF is screw retained and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. The Helmet is delivered in an ESAB display box, fully assembled and ready to use.
   
Helmets, Masks & Screens
The new Eco-Arc is the latest design in flip front passive welding helmets. With a light weight Poly Propylene shell and outstanding facial protection, the helmet is suitable for all position welding. The helmet also adopts the new Eco Headgear with 4 rake positions and 3 longitudinal adjustment positions for precise nose to shell adjustment. The helmet is supplied complete with outer protection lens, shade 11 mineral glass and the unique large internal protection glass
OrigoTM-Tech 9-13 Helmet
OrigoTM-Tech 9-13 Helmet
The OrigoTM-Tech 9-13 features an external shade adjustment between DIN 9 and DIN 13. The delay and sensitivity can be adjusted from inside. The OrigoTm-Tech 9-13 is suitable for MIG/MAG, MMA and TIG (over20 amps).
OrigoTM Air
OrigoTM Air
The Origo Air is a battery powered respiratory unit designed to fit the Origo-Tech welding helmets. The unit provides clean, filtered air to increase the comfort and safety for the welder. The Origo Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. The unit is supplied with an intelligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. The Origo Air is also equipped with a low flow alarm, which will give an audible signal when the filter is blocked, or the battery power is running low. The complete system is comfortable, lightweight and durable.
Hand Shield Armour
Hand Shield Armour
Flat fronted, flame retardant hand shield made from glass filled nylon having 1.8 mm shell thickness, weighing only 480 gms. This hand shield have a concealed handle with good thumb grip facility to protect hand. Lens aperture 83 x 108mm (4¼ ” x 3¼)
   
Eco Arc Helmet  
Eco Arc Helmet  
   
Respiratory Equipment
Filtair Disposable Masks
Filtair Disposable Masks
The ESAB Filtair series has been developed to improve the comfort of disposable respirators whilst maintaining an excellent face fit. Colour coding the range makes identification simple when varying levels of protection may be required. The mesh shell supports the filter media and prevents collapse onto the face and the preformed nose bridge provides comfortable fit eliminating constant adjustment. The filters use the latest filter technology to promote low breathing resistance and are approved to EN149:2001(meeting the 120mg load testing). The Filtair is available as a pre-moulded and flat version. Depending on the protection level needed and the breathing resistance some models are equipped with a valve. All the masks are fitted with buckle fastening which also allows the wearer to adjust the straps accordingly
   
OrigoTM Air
OrigoTM Air
The Origo Air is a battery powered respiratory unit is designed to fit the Origo-Tech welding helmets. The unit provides clean/filtered air to increase the comfort and safety for the welder. The Origo Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. This unit is supplied with an intelligent charger, which ensures a prolonged life time of the battery, by reducing the risk of over charging. The Origo Air is equipped with a low flow alarm, which will give an audible signal when the filter is blocked or the battery power is running low. The complete system is comfortable, lightweight and durable.
   
ESAB Filtair Flat A-1
ESAB Filtair Flat A-1
This mask provide P1 Protection and is suitable to wear during general dusty duties.
Filtair Flat A 2CV  
Filtair Flat A 2CV
This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. The carbon layer takes out bad odours. Suitable to wear during welding, brazing,so|dering, painting (brush applied), gluing (brush applied) and polyester resins (hand mix).
   
Spectacles, Goggles & Visors
Safety Spectacles
Safety Spectacles
These stylish spectacles are used for drilling, chipping and metalworking, they have a sporty style and are extremely lightweight. Available in two different lens configurations. All lens configurations provide protection against dangerous UV radiation. CE approved according to EN 166-F.
   
Smoked   Amber
Smoked   Amber
The Smoked lens is suitable when working in strong ambient light
  The Amber (yellow lens) enhances the light. This is suitable when the ambient light is not sufficient
     
Welding Goggle   Face Shield
Welding Goggle   Face Shield
New snugfit PVC make one piece Bocal type protective goggle with ventilators, holding rings with clear lense for gas welding, brazing and gas cutting.
 
Safety face shield is made of 1.8 mm thick, 6” long & 14" wide, colourless, transparent acrylic. This tilting visor is to protect forehead, eyes, cheeks, nose and mouth from flying particles, sprays or splashes of hazardous liquids.
   
Welding Curtains & Gloves
Welding Curtains
Welding Curtains Three colour types are available and all three can be supplied as standard curtains. The self-extinguishing material provides good protection from dangerous welding radiation. The curtains are equipped with press-studs for easy, strong fastening and they are folded at the top and the bottom to withstand harsh use. All approved according to prEN 1598. The mounting rings come in a package of seven, which is enough to mount any of the curtains (supplied in a standard length of 1.8m x 1.4m). Rings are included when ordering any of the curtains.

• Welding curtain, Dark Red 2001004001
• Welding curtain, Green Transparent 2001004002
• Welding curtain, Dark Green (DIN 9) 2001004003
   
Welding Hand Gloves  
Welding Hand Gloves
A welding glove made of hard-wearing, heat-resistant cow-split |eather,1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. This Glove is used for MIG/MAG/MMA Welding.
   
Heavy Duty Hand Gloves
Heavy Duty Hand Gloves
A hard wearing work glove made of cow grain leather with a cotton lining for comfort. This Glove is used for general working purpose .
   
Safety Footwear
safety footwear is tested and approved according to EN 345. Depending on application, footwear should always provide appropriate protection, EN 345 gives the following guidelines :
Safety Basic to EN345 200 joules toe protection

Safety Basic, antistatic and energy absorbing heel

Safety Basic, antistatic, energy absorbing heel and water resistant upper

Safety Basic, antistatic, energy absorbing heel, water resistant upper and steel midsole

Antistatic

Steel Midsole
Welding Curtains
Welding CurtainsOffers the comfort of a standard shoe and full protection according to S3. It is easy to ‘don’ and the foam laminated cambrelle lining makes it very comfortable to wear. The shoe is water and oil resistant and the seams are reinforced with 'Satra' standard nylon threads for maximum durability. The moulded PU sole offers a soft upper part with front ‘bumper’ and arch support,whilst the part in direct contact with the ground offers extremely high slip resistance. The shoe is equipped with shock absorption system to prevent ankle spraining risks. Also the sole is heat resistant up to 110°C.
   
Welding Tools & Accessories
Welding Cables
Technical Data
• Harmonised Welding Cable with general purpose Rubber Sheathing as Type SE 1 NBR-PVC HOFR Sheathing as Type SE 3 to IS 2 6380/84
• Conductor resistance in accordance to IS : 8130/84.
• Conductor resistance factor at +20°C - see technical catalogue
• Admissible working temperature at the conductor General Purpose: + 80°C HOFR/NBR - PVC Type: +100°C
 
Cable Structure
• Plain / Tinned annealed Copper / Plain Aluminium cconductor extra fine stranded & bunched in accordance to IS :8130/84
• Melinex tape used as separator over the conductor for better electric conductivity.
• Rubber / NBR jacketing as per IS : 6380/84
• With marking of brand name & Cross section on each mtr.
• Testing of cable carried out as per IS : 9857/90 at our inhouse facility
• Standard 100 mtr. length supplied in a eco-friendlyfibre drum
 
Application
• Rubber insulated flexible welding cable are used to connect Welding Machine & for better welding proficiency.
• Used in Automobile insdustries, shipbuilding, Transport Steel Plants, Railways Refineries, Oil fields, Automatic Welding Robots, Construction, Coal Mines etc.
• The robust construction makes these cables highly durable
 
 
Safety Requirements
• Coiled welding cable must always be spread out before using to avoid overheating in use
• Cables must not be spliced within 10 feet of the holder.
• Welding cable must never be coiled or looped around the body of the worker
• Cable with damaged insulation must be replaced
   
Electrode Holders & Clamps
Holder Handycool HC 600
Holder Handycool HC 600
This is crocodile style type ‘B’ electrode holder, which is made from black phenolic resin insulated jaws and black DMC handle. This holder is fully insulated for extra safety and brass jaws ensures good contact. It is suitable for cables up to Al 120 sq. mm./Cu 70 sq. mm. and used in heavy duty welding application.
   
Holder Confort 600
Holder Confort 600
An open head style type ‘B’ electrode holder with fully insulated head to resist spatter and sturdy handle, made of fibre glass poly amide 66 — 33 for heavy duty application. Insulation resistant above 1 M0 & Dielectric strength up to 3000 volts. This holder is suitable for cables up to Al 120 sq. mm./Cu 70 sq. mm. and CE certified as per European standard EN 60974-11.
   
Holder Handy 400
Holder Handy 400
A screw style ‘A’ type electrode holder with fully insulated head and handle for medium duty application. Handle is made of synthetic rubber for comfortable grip and tip insulator is made of DMC to resist weld spatter. Insulation resistant above 1 MO & Dielectric strength up to 3000 volts. This holder is CE certified as per European standard EN 60974-11.
   
Heavy Duty Earth Clamp 600
Heavy Duty Earth Clamp 600
An earth clamp made of zinc coated steel with copper plated jaws and suitable copper mesh that provides good contact with the work piece. Jaw opening is up to 60mm. and is suitable for heavy duty application.
   
   
Magnetic Earth Clamp 600
Magnetic earth clamp with strong gripping power that permits attachment to any ferrous object. These clamps provide a large contact area with less overheating — thanks to fewer junctions. Flat edges ensure perfect grip on the job and strong handle to pull it out easily. Magnetic earth clamp is very convenient to place anywhere and startwelding instantly.