Plasma Cutting Machines

LPH 35   LPH 50
Plasma Cutting Machines
Plasma Cutting Machines
8 mm MS/SS
12 mm MS/SS
The LPH 35 is designed for cutting of plates up to 8 mm thick. the front panel allows selection of cutting current of 20A or 35A to Suit the Power requirement of cutting conditions. The LPH 35 comes equipped with PT 30kk, an air-cooled torch having 4.0 m hose package
The LPH 50 is designed for cutting of plates up to 12mm thick. The front panel allows selection of cutting current of 30A or 50A to suit the power requirements of cutting conditions. The LPH 50 comes equipped with PT 27, a air- cooled torch having 7.6 m hose package
     
LPH 80   LPH 120
Plasma Cutting Machines Plasma Cutting Machines
25 mm MS/SS
35 mm MS/SS
The LPH 80 is designed for cutting of plates up to 25 mm thick. The front panel allows selectionof cutting current of 40A or 60A or 80A to suit the power requirements of cutting conditions. The LPH 80 comes equipped with PT 27, an air-cooled torch having 7.6 m hoouse package.
The LPH 120 is designed for cutting of plates up to 35 mm thick. The front panel allows selectionof cutting current of 6A or 90A or 120A to suit the power requirements of cutting conditions. The LPH 120 comes equipped with PT 25, an air-cooled torch having 7.6 m house package.
     
 
Technical Data
LPH 35
LPH 50
LPH 80
LPH 120
Main Supply
V/Hz
3x415 / 50
3x415 / 50
3x415 / 50
3x415 / 50
Fuse Slow
A
16
25
32
50
Rated Power
KVA
11
16.5
20
30
Max Output
At 35% duty cycle
A
35
-
-
-
At 60% duty cycle
A
-
50
80
120
At 100% duty cycle
A
20
30
60 & 40
90 & 60
Open Circuit Voltage
V
295
320
310
310
Pressure bar
Bar
3.5-7
4.5-7
4.5-7
4.9-7
Air Supply
L/min
-
-
-
132-170
cooling Air
L/min
8/12*
12/15*
25/35*
35/45*
Enclosure Class
-
IP 23
IP 23
IP 23
IP 23
Weight kg
kg
52
89
131
167
Dimension LxWxH
mm
610x255x515
680x325x515
760x390x845
760x390x845
*Quality cut / Severing
 

Ordering Information

LPH 35 with PT 30 KK-4M 46F0303035
LPH 50 with PT 27-7.6m 46F0301050
LPH 80 with PT 27-7.6m 46F0301080
LPH 120 with PT 27-7.6m 46F0304120
 
LPH Cut Speed Data
 
LPH is suitable for AI, SS and also for Carbon Steel
• Faster and economical on AI, SS, Carbon steel below 12mm
• Cutting starts from 0.1mm onwards unlike 6mm of flame cutting
• Very safe and convenirnt on any application
• No distortioneven on sheet below 6mm
• Saving on storage and maintenance of gases
• Better quality of cuts
• Easy to adapt and lesser skill requirements
• No naked flames
• Circle and profile cutting accessories
• Light weight torches makes cutting effortless